CubeX P8.9 have big printing area, 190*118*170mm, good printing frame surface, easy to operate, small size and design for table requirement. CubeX P8.9 is only choice for school education. Meeting most normal printing requirement, less operating after post process.
3D Printers for School
4.3inch Color touch screen can rotate 60°,automatic feeding.
1.What’s the difference between the CubeX and SLA 3D printers?
SLA 3D printers use a laser beam to cure the resin. The XY resolution of printed parts is dependent on the diameter of the laser beam, which is 300 microns. The CubeX does not have this limitation and can print at 100-micron XY resolution, three times better than other SLA printers. The other difference is the speed of fabrication. The printing speed depends on the complexity of the parts in SLA 3D printers, but with the CubeX the complexity does not affect the printing speed.
2. How do I connect the CubeX to my device?
You can either connect the CubeX to your device via Wifi or via an Ethernet cable directly plugged into your router.
Contact Us :email@example.com