Fit for personal inventor, digital education and low cost production. The desktop 5 axis CNC can be used everywhere on the table, low cost quick design, and easy production Desktop NC is 5 axis digital machine tool. Controlled by Windows system, use CAD or CAM to mill. Desktop NC support G code control as well. As pocket size, five axis motor main axis have speed 0-24000rpm, enough for professional designer basic application.
Small 5 Axis NC is upgrade version use No.57 servo motor, normal motor movement speed within 2.5m/min, and servo speed can be within 12m/min, servo no noise, high reaction, positioning accuracy, warning with no steps.
Desktop NC support to mill material as common plastics, Al alloy, Wood, Copper, Gold, Silver, Wax, different materials can use different tool bit, without use wrench, easy operation.
1.How much experience is required to use the 5 axis desktop CNC machine?
If you have CAD/CAM software experience then you are well enough to do it!
If you have worked with 3-axis, but not 5-axis machining, there is a learning curve, but you can get started using the machine right away with your 3-axis experience and then move into 5-axis.
If you have CAD experience, but no CAM experience then you may want to buy and download the Autodesk Fusion 360 Ultimate before deciding to purchase the desktop CNC V2 or V3
If you have no CAD/CAM experience you do have quite a experience in design, but it is possible and we have had users get up it! You will want to buy and download the Autodesk Fusion 360 Ultimate before deciding to purchase the desktop CNC V2 to see if this is something that you think could work for you. There are so many tutorials both video and written to get you going, be sure to check out some of the CAM tutorials as well. There are several 3-axis machine options available which are less expensive, so this may be a good way to start as well to decrease the learning problem under a lower cost.
2.How about software is needed?
We suggest to use Autodesk, as for Fusion 360, it is free for educators/students, hobbyists, and startups and is compatible with Windows and OSx. You may also use whatever CAD/CAM software you would like
Contact us :firstname.lastname@example.org